Power

Triple redudant power supply Three ways of powering the PXFmini:

  • USB input
  • Power module input
  • Servo rail input

NOTE: Before connecting the Power Module, check the Power Module layout.

We recommend to use the Power Module to power the PXFMini, especially if multiple peripherals are connected.

Warning: Use only one method to power your board. Otherwise, your board or power source can be damaged.

Notice that the power connector has attached two ADC channels in order to read battery level. If you don't use this connector, you could use the two middle pins to have analog voltage lectures for a sensor/device.

** Power connector **
  ------------------
 | .  .  .  .  .  . |
  ------------------
   |  |  |  |  |  |
       ch0 ch1

Warning: The range of input of the ADCs are 0~5v. Do not connect anything that exceeds this voltage.